I’ve finally bought the Ultimate Nipper SPN-120, thought I’ll share with you guys how it performs
Ultimate nipper nipping comparison against mineshima premium thin blade nipper~
As you see the ultimate nipper is worth its price, little nip marks are visible after cutting and almost cannot be felt, this leaves sanding effortless, only need a few passes then it’s clean 🙂
Above is the nip mark left by Ultimate Nipper
Above is the nip mark left by Mineshima Premium Thin blade nipper
Ultimate Nipper=totally worth the price
because it leaves a pretty clean surface, doesn’t damage the plastic and makes sanding nip marks off effortless
the bottomline= GET IT!!!!
extended my spray booth with a box i made from Polypropylene Sheets, Polypropylene are resistant to solvents so its safe to spray my paint without worrying about the mess 🙂
This is the redesigns of the orb markings of SD Fusion 00 Raiser to allow LED-ing, use them by printing it exact size and cut and overlay the originals and credit me 🙂
NOTE: The white bits on the markings allows LED to Shine through when printed on normal White A4 paper. But remember to drill holes/gaps to allow lighting to seep through.
Head Orbs: SD
Clear Red Forehead: SD
Upper and Lower Arm Orbs: HG
Leg Orbs: HG